To be able to mount the dial gauge 208.015 on the CNC Alignment Collar from DIY3DTech it need a flap on its back side.
The attached back cover has such a flap. So the dial gauge can be used with this collar.
I used it to check the quality of the bed leveling of my device. https://youtu.be/mLAwB4jLXgA
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
35%
Filament:
PLA silver
Notes:
I used a 0.2mm nozzle to get exact holes.
Category: Machine Tools
The author hasn't provided the model origin yet.