Radiator Mount for CNC3020

With this two mounts a water cooling radiator can be mounted to the portal of a CNC 3020 milling router to replace the ridiculous water bucket cooling by a closed loop. No new holes have to be drilled because only the existing bolt holes will be used.

The holders for the tank/pump-combination are glued to the portal.

The goal to not increase the size of the machine was reached. All parts are mounted within the original outer dimensions of the device.

An improved version of the cooler is to see here: https://www.youtube.com/watch?v=BFLYIL3ggew . The improvements to be seen there can be found here: https://www.thingiverse.com/thing:4178050

Radiator: https://www.aliexpress.com/item/33007389407.html

Pump: http://aliexpress.com/item/32965180139.html

Tank: https://amazon.de/gp/product/B078PB8XNM

Fans: https://amazon.de/gp/product/B002KTVFTE

Print Settings

Printer:

FIashForge Dreamer

Rafts: 

No

Supports:

No

Resolution: 

0.20 mm

Infill:

50%

Filament:

PLA black

Notes:

Printed in the given orientation no support will be necessary.

Category: Machine Tools