Replacement Tappet for Surefeed Sealed Pet Bowl

The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years.

This part can replace this tappet making the bowl working again.

For better stability and to prevent the need of supports I took the arm and the axle apart. So they can be printed in the best position for a higher strength.

It looks not so sophisticated like the original part but is much stronger.

Print Settings

Printer:

FIashForge Dreamer

Rafts: 

No

Supports:

No

Resolution: 

0.10 mm

Infill:

100%

Filament:

PLA white

Notes:

It's highly recommended to use a 0.2mm nozzle.

Post-Printing =============

The axle fits tight in the arms hole. No glue is necessary.

Category: Replacement Parts