SOVOL SV08 MAX AUTO FEEDER BUFFER PTFE TUBE FILAMENT GUIDE

Help guide your PTFE tube out of the top of your auto feeder buffer to ensure reliable operation & stop it getting pulled over too far & jamming!

BOM:

No hardware needed

PRINTING:

Print PETG/ASA/ABS 0.2-0.3 layer height, 4 walls. Lay model flat on base, no supports.

Note: The base of the unit is 0.3mm so be sure to set your first layer to 0.3 & make sure your Z offset is correct so its good!

ASSEMBLY:

Slide the auto feeder into the guide & attach to the printer using original bolts. Slide the PTFE tube into the top.