Funnel for Assortment System - storage box / Boxsystem

With this funnel for the expandable assortment system, you can easily pour your screws etc. into boxes, without spilling.

You can find the boxes etc.: in this collection: Assortment System

Features of this system

• You can place it on every size of the boxes!
• You can store it between the boxes on the grid (size 2x2)!
• Easy to pour in your screws, etc.

Measurement

• The uploaded model is with a grid size of 60x60 mm and a height of 45 mm. (Probably more variants in the future, if needed)

Print instructions

Recommended Print Settings

I would recommend printing with a raft and a brim and on the right side.

• Infill: 15 %
• Layer height: 0,20 mm
• Supports: No
• Brim-width: 2 mm
• Raft layers: 3 layers

Print Time

• approx.: 3:02 (hr:min)

Material use

• 33.22 g

Tested Printer

• Prusa i3 MK3S+ Drucker

Tested Filament

• Prusament PETG Prusa Orange
• Prusament PETG Prusa Galaxy Black
• Prusament PLA – Prusa Glaxay Black 
• Polymaker PolyTerra PLA Sapphire Blue 
• 3DJAKE rPLA Schwarz
• 3DJAKE rPLA Grün
• etc.

Future Expansions

• handle
• case
• cover
• tool inserts, bit inserts, drill inserts, etc.
• drawer - system
• external label field
• different grid sizes
• different height
• smaller sidewalls, for faster prints and fewer material consumption
• etc.

Updates

---

If you have any questions or improvements/suggestions do not hesitate to contact me!

If you like what you see, consider following me to support my work - more to come -

AUGU5TO | PrusaPrinters

Every product in the links, I bought and tested by myself. As an Amazon Associate I earn from qualifying purchases through my Amazon links. By buying through any of the links above I will earn commission at no extra cost to you.