Honda Grom 2022-2024 Baja Squadron Sport/Pro Headlight Shroud

This is a 3D printable headlight shroud to mount the Baja Designs Squadron Pro/Sport headlight. This is designed to mimic the Chimera in terms of aesthetics. Item description is a work in progress. For the most part, it uses Voron spec heatset inserts (M3) and the self-tapping plastic screws to mount the shroud. There are printed standoffs so you can zip-tie the wiring harness in the path of the vent holes to cool it down. Print with ASA.

BOM:

M2 x 10 Self Tapping Screws (x4)

https://kb-3d.com/store/inserts-fasteners-adhesives/275-m2x10mm-self-tapping-screw-for-plastic-hex-drive-1640931303062.html

M3 x 10mm (x17) (I think you can also use M3 x 8mm)

https://boltdepot.com/Product-Details?product=6380

M3 x 5 x 4mm Heatset Inserts (x17)

https://kb-3d.com/store/inserts-fasteners-adhesives/278-brass-heat-set-threaded-insert-for-plastic-m3x5x4mm.html