Vero VGC N76/BTECH UV-Pro/Radioddity GA-5WB Call-sign Nameplate

I created this model in OpenSCAD and then applied the callsign text in Bambu Slicer. I've included an example STL with my callsign, KQ4VYY.

To print this model, I use a Bambu P1P with AMS for dual colors and a 0.2mm nozzle, but this could easily be done with a pause halfway through printing to change filaments on other printers. I recommend turning ironing on to get a smooth finish on the top side of the plate. Once you have the nameplate, affix it to the radio with a couple dots of superglue on each end!

Temporarily Offline Shoutout: 

Spencer
73