Google Pixel 10/10 Pro Case

These cases are meant to be printed using flexible filament (eg. TPU 95A - 98A).  

My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot.

8-30-2025 - Added optional kickstand versions

8-31-2025 - Added “slimfit” versions, where back wall thickness equals sidewall thickness.  Camera bar protrudes unprotected, so be wary of that.

9-13-2025 - Added standard vs. rugged versions.  Standard versions have 1.5mm sidewalls, Rugged has 2.0mm sidewalls.

9-13-2025 - Added optional grip textured sidewalls.  Be sure your printer is well-tuned for this one.