Clas Ohlson Cocraft - Inserts / inlays for organizer / assortment system

0 reviews

D 7

DoomDevil

@DoomDevil_3577099

Inserts / inlays for Clas Ohlson Cocraft organizer / assortment system.

updated August 31, 2025

Description

PDF

Different inserts for Clas Ohlson Cocraft line / system of assortment boxes and bins. They're really good value for the money, and the quality of the boxes are good. But the compartments in them are a bit big for smaller objects.

Removable inserts for the boxes so you don't have to keep the whole box close when you just need what's in one insert. Inserts with and without dividers integrated if you want to store more stuff. The ones with dividers are a bit easier to remove from the box since you can grab the divider to lift them.

Inserts have a fillet facing the front so it's easier to remove small objects from them.

They also help keep thinner and smaller objects from shifting compartments when transporting the boxes.

Files with complete sets of inserts, one with and one without dividers. If you don't want to print them all or want to mix them then just open the file and delete the ones you don't want. The models are named after placement in the box except 2 of the inserts for the bix box (read below).

Share a photo of your prints, it's fun to see the results :)

Big boxes

The inserts fit on one side of the included factory dividers, so you don't have to fill a whole row with printed inserts if you don't want to. If you have 2 inserts side by side then remove the factory divider.

Apart from the corner and front inserts you will need the following to fill up a whole box with inserts:

4pc of insert A
4pc of insert B

One complete set with dividers is about 260g of filament (230g without dividers).

Small boxes

Keep the factory dividers.

One complete set with dividers is about 116g of filament (97g without dividers), and should fit the bed of most printers.

Bins

Made a blank holder for marking the open bins. Either put 9mm marking tape on them or add text in slicer. Just keep in mind that cleareance around the text is needed either way because they slot into the holder of the bins.