Prusa CORE One MMU3 Buffer left side mount

Print instructions:

Download the latest PrusaSlicer and use the following settings*:

• Print settings: 0.20mm STRUCTUAL
• Filament: PETG (tested on Prusament)
• 15% Grid infill

Additional parts required:

• 12x Magnets 20x5x2mm or Magnets 20x5x2mm

* Note that print settings are recommended, but you can experiment with your own. 

The prints were tested on the Prusa CORE One

Changed the Magnet size from 20x6x2mm to 20x5x2mm.