A small housing to mount the “Jungle Lux Mini” grow lights. Either by sticking it to the desired destination with double sieded tape on the small tabs or mounting it with screws, through the 3mm holes in the same tabs. To mount the light inside the housing you can use the double stick tape, supplied with the lamps or you can use the mounting holes and 2 M3x5 mm screws. You can you leave them unfixed and they sould hold in place by the two electrcal wires, which have to go through a hole on either side of the housing.
The link to the lights is:
https://www.jungle-leaves.de/produkt/jungle-lux-mini/
The author marked this model as their own original creation.