EZ Brass Barrel / in-line mag for TKO

Updated - 6/29/21 - Added a new "Bigger Flare" file. This had a bigger flare at the back of the inline mag for easier dart loading. To use this you must remove the AR from the Knockout.

Updated - 7/5/20 - Added a spacer to put at the tip of the silencer to help align everything.

Updated - 7/4/20 - Didn't like how it wasn't opening the AR properly. Fixed the lip

EZ Brass Barrel / in-line mag

If you'd like a brass barrel for your TKO build, use this and a length (I'm going to cut flush with the silencer once it's all together. Seems to be about 3" but the Knockout can take way more.) of 17/32" brass tube instead of the polycarbonate tube from the instructions.

I'd suggest gluing in the brass barrel and adding some tape to the print, where it goes into the blaster (or do the tape and o-ring trick from the original instruction videos), to get a good seal. I'll maybe update the print to accept some o-rings but I need to get some that are the right size and do some testing.

Print Settings

Supports:

No