CHAdeMO Vehicle Socket Cover

An extremely basic cover for my Leaf's CHAdeMO cover, which the previous owner had apparently broken off through closing the charge cover without first closing the stock CHAdeMO cover.

While I can't guarantee that it'll be back up to its normal IP rating, at least this way the socket isn't open to the elements while charging!

I printed this in ABS at 0.2mm resolution, low quality, and it just slides into the socket like a glove, and the cover closes without fouling on anything.

I left the lugs on the sides large to aid removal with gloves on.

NOTE: The ‘NISSAN’ logo on the back is actually from another model that I just sliced flat and glued on to the back of my basic cover, and isn't part of the model here.