RING video doorbell - mounting unit with name faceplate

This is a holder for a RING video doorbeel WIRED, which has additional space on the side for a name faceplate, on which you can indicate the name and street including your house number.

Here´s a link to the doorbell: https://www.amazon.de/ring-video-doorbell-wired/dp/B08LR3G17D/ref=sr_1_2?keywords=ring+video+doorbell&qid=1645735578&sprefix=ring+video+do%2Caps%2C146&sr=8-2

(NO affilliate link)

Under the nameplate is also space for additional cables, which may still be present for the intercom (so it is at least with me).
To customize the nameplate, please use the enclosed F3D.-file, which you can use to change your name and address in the sketch of the nameplate.
I have drawn the house number on the basis of a sketch. Either delete this sketch and design a number yourself or simply enter the number inside the text.
The camera holder is also tilted 30° to the left to cover the area in front of the front door.

Since I'm honestly just too lazy to write a proper assembly instruction, please take the enclosed Fusion360 to get an idea how to mount it ;)

I highly recommend printing all parts out of ASA, since its the only cheap material that is UV-and heat-resistant for proper outdoor use.

I personally used PRUSAMENT Galaxy Black, Jet Black and White ASA for the unit on the pictures.

I printed all part with 0.15mm layer height, 3 perimeters and 20% infill. Be sure to use an enclosure to print the parts since they are pretty big and tend to warp.

For mounting on an ETICS I recommend FISCHER insulation anchor FID50.

https://www.amazon.de/Fischer-48213-D%C3%A4mmstoffd%C3%BCbel-50-St%C3%BCck/dp/B000ONQ2W8/ref=sr_1_11?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=UXTQAN457KZ2&keywords=Fischer+WDVS+D%C3%BCbel&qid=1645736204&sprefix=fischer+wdvs+d%C3%BCbel%2Caps%2C113&sr=8-11

(also NO affilliate link ;)

If you have any further questions, please just leave a comment.
I will try to answer as soon as possible.