MTG Arabella | Annabelle Deck Box

I stumbled across this deck box (Created by chrisdo023) while building my Arabella deck and thought “I have to have this”, but was unable to find the STL anywhere. So I found this Deck Box on OnShape (Created by Bender) and made the changes to closely recreate chrisdo023's design. This was my first time messing with 3D modeling and OnShape so sorry for any and all mistakes. I'm open to feedback so please let me know what I could have done to make it better!

Snuggly fits a 100 card sleeved deck with a slot for your Arabella Commander and a slot for token or sideboard cards. 

Printing Instructions:
(ELEGOO Neptune 4 pro)

• I printed the main box standing straight up and the Roof laying on its back.
• 17-20% Cubic Subdivision Infill, you definitely don't need that much but that's just what mine was already set to. 
• Only supports I used were for the Window on the Box (Tree) and for the small gap between the back of the roof and the back of the Dove Tail (Standard).

There is both a version with and without the Warning label easter egg if you don't want to print the lettering.

Here is my Deck List if you are curious. I would also love feedback on that as well. This is my first self built commander deck that I'm actually proud of lol.

Thanks for checking out my Model, I hope you enjoy!

Original Deck Box

Inspiration created by chrisdo023