BTECH UV Pro Yaesu Clip Adapter

This is an adapter that allows the use of a Yaesu Clip-14 button style clip. I have these clips on all my stuff so makes it really easy to just clip the radio on and go. No additional hardware required. This screws on with the factory BTech UV Pro clip screws, and the screw that comes with the Yaesu clip.

Printed in ASA so the sun doesn't make it soft/melt, 95% infill, printed in orientation of .stl

I used Initial Layer Height of 0.1mm and Layer Height settings of 0.1mm in BambuStudio

Link to clip: https://www.hamradio.com/detail.cfm?pid=H0-006807&srsltid=AfmBOoosUv_4LmpTGO-Yy3bbXB-Adm4vEb8R-KZny4So1gPm37cucvAI

https://www.amazon.com/JAGTRADE-CLIP-14-VXA-710-FT-277R-60%C3%9725%C3%9720mm/dp/B0CS6CB7C8/ref=sr_1_2?crid=13ZXC9EVQIGB3&dib=eyJ2IjoiMSJ9.aPK_8YWduJTmzzlb_p4xh8Hk5_KWJsmmwGYvy--7PjnlTuG5nmbVBUFe8BZo1y4KAMKjU1ncj_yx8N9nEQHQGYB46XOmUx5Lswv3y168bubbkq_yg8A7b5m6lVjitV00w5MYtsoZXKmTT--RkaGkDPUsmO-TLCOJHo9FPyds023t3yR-zelV0kUz19obZtXArbkrjqRRegnQ3NrKKxmp6M9r7_3yUCUFNSZXsrFe8zA.x--BlxdgK00JXHdvj3egP5Woqqfe1xtpTuwlC6oQB8s&dib_tag=se&keywords=yaesu+vx-6r+clip&qid=1755832322&sprefix=yaesu+vx-6r+%2Caps%2C102&sr=8-2