MagicSmoke_: Smoke Stopper (3.5" FPV Racing Frame)

This is the “Smoke Stopper” a 3.5" FPV racing frame developed by me (MagicSmoke_).

This frame was designed to address 3 main issues:
- Frame needed to be durable (as I am not made of money)
- Frame needed to mount a 25mm x 25mm aio square to the camera as to reduce the amount of unprotected area on the aio
- Had to compatible with every possible configuration of video system or electronics (in order to make as accessible as possible to any level of pilot)

Basic information about the racing frame itself:
- Carbon Components include the “Smoke Stopper” frame (3mm t700) and top plate (2mm t700)
- 3d printed components include the camera mounts and antenna mounts all are to be printed in TPU

Recommended Build:
- Motors: T-Motor F1404 3800Kv 
- Propellers: HQProp T3.5x2.5x3
- Flight Controller: 20x20 or 25.5x25.5 or 16x16 AIO (based off frame choice) 
- Battery: 4s 550mah or 650mah Tattu 
- Video System: Analog and Hdzero are compatible
- 10x130mm Battery Strap (For 4s 550mah. Longer for larger)
- Antenna: True rc RHCP 45mm

Revision History:

8/21/25: Intial Release of model