A folding sign to warn others that you are printing! Uses a piece of 1.75mm filament as the pin to connect the two pieces.
A small piece of electrical tape on the bottom of the legs gives the sign good grip on the floor.
The back of the sign has two options, one with the same text as the front, and one without text.
To print the sign and the text in different colors, use the PrusaSlicer color change feature:
https://help.prusa3d.com/en/article/color-change_1687
Also check out the spaghetti version!
https://www.prusaprinters.org/prints/139368-caution-making-spaghetti
The author marked this model as their own original creation.