Luxury Ball Piggy Bank

Luxury version of my piggy bank.

This model is very easy to print. My only suggestions are as follows:

• Height range modifier for the bottom piece 0-7mm - use slower speeds and lower layer height
• Color change for bottom shell at 41mm. This should be from black to silver.
• Color change for top shell at the following heights
  • 2.8mm silver > black
  • 29mm black > gold
  • 33mm gold > red
  • 37mm red > gold
  • 41mm gold > black
• Color change for button 1 at 0.6mm from gold to silver

Assembly should be easy, just a little glue and eyeball aligning. I suggest doing a dry fit before gluing to be sure you have alignment correct.

~~ If you love the design and wish to support me or have permission to sell physical items from my designs, please consider becoming a member!

If you print this, please share a make so I can see! Also, if you like this model, give it a heart! Any questions, feel free to ask in the comments and I'll do my best to try to answer.