Razor blade spacer

I made this because some of the 3d-printed safety razor's I felt were too shallow.

Warning, if you make this, be careful to not cut yourself with the now more aggressive angle.

Gcode is just for printables reference, I always recommend slicing your own gcode.

Referenced model included in the blend file is from AzizBelhadji:

This work is based on "Razor Blade" (https://sketchfab.com/3d-models/razor-blade-d79a8588c4e3487483426124820e4cfa) by AzizBelhadji (https://sketchfab.com/aziztkbpc) licensed under CC-BY-4.0 (http://creativecommons.org/licenses/by/4.0/)