SotaBeams Tactical Mini Guy Ring - 4th segment fit

This is a low mass guy ring for the SotaBeams Tactical Mini Antenna Mast.  This is sized for the 4th segment up, which seems to work well.  It's almost chest height.  PETG might be warranted for windier/higher stress climates.  The fitment was spot on for my mast as shown in the pic, but be sure to check the sizing for the variation of your printer.  The holes are sized to accept standard 550 paracord, bank line, etc.  

Update 08_21_2025:  I have added a second design for more demanding environments by making it thicker and with slope support to better distribute the forces.  The original is fine for mild weather, but with PLA in hotter temps it will warp.  Printed this second design with PETG and will see how it holds up in the heat.