CORE One – Horizontal Cable Guide
Description
PDFEnglish
CORE One – Horizontal Cable Guide
On the Prusa CORE One, the PTFE tube also acts as a cable holder, but it hangs loose and does not keep the cable horizontal.
With MMU3 installed, the tube is no longer needed.
This model originally replaced the tube with a strapping band (15.5 × 0.7 mm) held in a 3D-printed clip.
Update:
The model now includes two versions:
Clip version – uses a separate printed clip to hold the strapping band
Direct strap version – the clip is removed and the strapping band runs directly in an integrated guide on the printed part
Result: tighter cable management, no dangling cables, and free toolhead movement.
https://www.facebook.com/100000655244863/videos/pcb.5114107335481749/1384030599365213
Best regards
Leif Lumby Henriksen
Odense3D Community: https://facebook.com/groups/2911561982402973
Dansk
CORE One – Vandret kabelstyr
På Prusa CORE One fungerer PTFE-tuben også som kabelholder, men den hænger og dasker i stedet for at holde kablet vandret.
Med MMU3 monteret er tuben ikke længere nødvendig.
Denne model erstattede oprindeligt tuben med pallebånd (15,5 × 0,7 mm) holdt i en 3D-printet klips.
Opdatering:
Modellen findes nu i to varianter:
Klips-version – pallebåndet holdes i en separat 3D-printet klips
Direkte pallebånd – klipsen er fjernet, og pallebåndet løber direkte i en integreret styring i plastdelen
Resultat: strammere kabelføring, ingen dasken og fri bevægelse af toolhead.
https://www.facebook.com/100000655244863/videos/pcb.5114107335481749/1384030599365213
Med venlig hilsen
Leif Lumby Henriksen
Odense3D Community: https://facebook.com/groups/2911561982402973
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
CORE One – Horizontal Cable Guide
Result: tighter cable management, no dangling, and free toolhead movement.