Anycubic Mega Zero 2 Y-Axis Linear Rail Upgrade

This mod swaps v-wheels for linear rails for the Anycubic Mega Zero 2. 

What you will need:

(2) MGN12H 300mm 
(22) M3x6 (MGN12 mount frame)  
(22) M3 T-Slot Nuts
(8) M3x8 (MGN12 mount bracket)
(2) M5x16 + nut (flat head screw)
(2) M8x20 + nut (flat head screw)

First, you must screw the bracket to the build plate and then connect it to the linear rails. Otherwise, you will not be able to access the top screws.
Make sure that you do not install the bracket incorrectly. The longer side of the bracket points toward the Y end stop and must be on the right side.
The end stop bracket is simply pushed into the frame and holds itself in place.