Headlight for JEEP Wrangler JL 1:8 (3Dsets.com)

Before installation can be equipped LED in the headlights:

• I printed the models "Front light - left.stl" and "Front light - right.stl" with holes 5 mm (corresponds to the size of my LEDs).
• I respect the model license (model purchased on 3Dsets.com) and will not publish the modified model. However, it is not a problem to create a hole in PrusaSlicer :-)
  
• For a 7.4 V battery and two parallel LEDs => two 300 Ω resistors for each (but it depends on the parameters of your installation).
  

You can also install the headlights (lamps) without LEDs. My 
headlights.stl model is universal for both parties.

Material: Prusament PLA Vanilla White