MODED XOL toohead (CPAP version ) hotend mount for Microswiss flowtech (Bambu Lab ),RGB neopixel ,Orbiter mount

Please read the complete Description:

Moded hotend mount for the Xol toolhead CPAP version optimized for the Microswiss Flowtech hotend (Bambu Lab drop in replacement ) plus i changed the nozzle leds from the sequins to  RGB neopixels (they are easier to solder less fiddily etc.. )

Also there is a slit on the back side for the thermistor and heater cartridge cables to pass.This enables a smoother transition for the cables reducing the risk for breaking a cable ( the Microswiss hotend is quite pricey ).

Print Settings:

V2 now available with print in place support as a single file

A brim may help.

HARDWARE:

Hotend mount hardware:

2X M3 Nylon lock nuts 

2X M3X25 Caphead screws

Hotend fan :

2 or more M2.5 heated inserts

2 or more M2.5X15 screws 

CPAP duct :

8 M2X10 self tapping screws