Trash Bin

Here it is y’all, the fancy pants trash bin!

You will need the following supplies:

-0.5 x 5 x 15mm Compression Springs (QTY.1)

-Music Wire 0.031” Dia.

-3mm Steel Stock

-Flat Head Screw Set

-Set Screw Set

-Socket Head Cap Screw Set

Screw List:

-M3 x 10mm lg. Countersunk Head Screw(QTY.6)

-M3 x 20mm lg. Socket Head Cap Screw(QTY.2)

-M3 x 12mm lg. Socket Head Cap Screw(QTY.1)

-M4 x 4mm lg. Set Screw(QTY.2)

Pin List:

-3mm Dia. 83mm long(QTY.1)

-3mm Dia. 40mm long(QTY.1)

Torsion Spring:

Download files to view build guide with dimensions for torsion springs.

See my Caliper Case Post for more info on winding your own torsion springs using the winding blocks included in this download.

I printed all the parts out of PETG at 0.3mm layer heights. 

No supports for any of the parts.

I used 5 walls for all parts and 4 top and bottom layers.

I have included a build guide in the downloads with many more pictures and some basic instructions.

Happy Printing and thank you for the support!