Kenwood Chef food processor slicer disc blade holder organizer protector

This utility is designed to hold the six slicing blades / discs of a Kenwood Chef food processor.

It differs from the plenty other models with the same purpose in that it is designed to be used in our big drawer for kitchen utensils. Therefor the design is mostly closed, protecting the blades from other utensils in the drawer, at the cost of using more material. It is supposed to be standing upright directly behind the drawer's front panel and the blades / discs are to be inserted / dropped in from the top. They can be grabbed by the edges either using your fingers as tweezers or as you would grab a CD without leaving fingerprints.

A Photo of the applied use will follow when I find someone who is able to print this part size without further partitioning (260x260mm). For now I can only provide a photo of a miniature mockup I printed myself.

I manually sliced the model into separate parts that can be printed without support with the largest face on the printbed. I modeled 2mm alignment holes where some 1.75mm filament can be inserted to align the slices when assembling / glueing them together. The digits in the filenames indicate the order, parts with two digits are required twice, printed identically but mounted in reverse the second time. Of course you can try to print the unpartitioned file without digits, either standing upright on the rectangular face or with support at your discretion, any feedback is welcome. I'd expect the “fins” to become less durable when printed upright.