TZB MMU2S Filament Buffer

Shout out to TNDave for the basic idea, this is re-designed with my own touches and the ability to use my favourite fitting, the M10 passthrough.

This is for use with PRUSA i3 MK3S:MMU2S printers.
Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... "https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases"

If you also don't like the MMU2S Extruder Tower idea then maybe check out my alternate solution. "https://www.thingiverse.com/thing:3847587"

AMF file with correct orientation attached for easy layout and slicing.
These print beds are required to assemble a full set for the MMU2S file channels.
5 x Case AMF bed layout
1 x Paddle AMF bed layout
1 x Base AMF bed layout

Required Hardware.
1 x 1m M3 Threaded Rod
14 x M3 Nuts
5 x 22x7mm Bearings
Acrylic sheet cut into the following sizes.
2 x 128.5mm x 335mm
6 x 120mm x 350mm

Here is an animation to help visualise how it all fits together.
"https://youtu.be/XO-66k3huAQ"

Print Settings

Printer brand: Prusa

Printer: MMU2s

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20% Gyroid