XShot Motorized Piston Pump 'Utonagan' handguard - long version (remix)

see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. 

A (longer) handguard for the Motorized Piston Pump by XShot.
There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom.
Slides over the barrel collet from the front. 2 bolts clamp it down. 
Can print without support.

REQUIRED HARDWARE :
- 2x M5x30mm socket head screw
- 2x M5 Hex nuts (Nylon lock nuts recommended) 

4cm longer version of this already beautiful barrel shroud.