Longboard Bushings Collection

Here's a variety of different longboard bushings. Cones (4 different heights), barrels (4), chubby's (2) and magnums (2). I also added fat cones. The pressure needed to turn and the angle it becomes harder are dependent these shapes. The cones and barrels fit into standard cup washers. The chubbies, magnum and fat cone fit a flat washer as they are ~5mm larger in diameter. 

Warning: 3d printed bushings are not as strong as cast bushings, be careful. 

Print in TPU with:

• 103% flow
• dry filament
• use concentric infill at 99 or 100%
• 10-20 degrees hotter than the listed temperature

If having trouble printing, ensure a minimum layer time and proper cooling.