Staff of Domination (MTG)

When printed at full scale the staff measures 928mm tall. Its main body is made from ¾ inch schedule 40 water pipe.

Additional Purchased Parts

• 8x M6x1 Pan Head Bolt 12mm long (12mm diameter, 3mm thick head)
• 8x M6x1 Hex Nut
• ¾ inch schedule 40 water pipe
  • 145mm long
  • 450mm long
  • 117mm long 
• 5x 1-ounce glass jar (listed in instructions as Small Vial)
• 1x 3-ounce glass jar (listed in instructions as Large Vial)
• 2x 6mm Spring 20mm long - Optional

Notes:

• Please refer to SoD Assembly Instructions.pdf in the download for detailed instructions with diagrams.
• Some of these parts have tight tolerancing with nominal gaps between pieces of 0.10mm. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
• Some regions not have access to the same purchased parts I used. Due to this, relevant models for those parts are uploaded as reference. They are not intended to be printed.

Post Printing 

• The large and small vials are filled with colored resin. Please note that not all colors of die have equivalent amounts of pigment.
• Painting was done with auto filler primer, Krylon metallic dark metal, and Rust-oleum brilliant metal bronze. Weathering and detail painting was done by hand with acrylics.