SpinPot Planter

Desinged for inner pots  with a hight of 11 and an radius of 11 cm.  

(https://www.amazon.de/dp/B09ZGXP7FS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)

Works in PLA, but PETG could be better. 

No Supports needed. 

Slowley printet with  .2 layer hight
5 top layers
3 walls 
15 % infill

The Inlay can be used to get some extra hight which should improve the drainage of the plant.