Vesa Mount 75mm

This is an adjustable 75mm vesa mount that can extend by unfolding. Suitable for light weight monitors upto 3kg. This weight is not tested so use at your own risk.

Screws directly to the wall above the desk.

I have a large printed washer that fits over the wall mount for added strength due to the direction of the print as I printed these without supports.

I have had my monitor mounted for 2-3 months now without creaking or it coming off or breaking.

Printed in PLA+, however...

I have been printing with Esuns ABS+ lately and would recoomend this material. Easy to print with, way easier the petg TBH and using a brim I have not had any prints let go of the bed. Current settings are...

5 flr/roof layers, 4 walls, 40% infill, 243c noz temp, 85c bed temp.

5x M6x100mm bolts

10x M6 washers

5x M6 nylok nuts

4x M4 countersunk bolts

4x M4 nylok nuts

Works for me!

UPDATE 11/20/2021

Being honest, the PLA has sagged a little but it's still on the wall. Really happy with the durability of this chunky design.

Works for me.

Please consider a donation to help support my designs.
PayPal.Me/RedWhere2020