Knomi for Anthead G2

Knomi V2 on the Anthead. 

Its not realy nessesary but its funny and looks realy nice.

You need:

• 5 x M2 Heatsetinserts. Modell is designd for Ø 3,3mm and L 4mm ( cheap china ones )
• 5 x M2 Screws min. L 5mm

Be aware melting in the inserts. I made it serval times till its right! :-)

I print the Parts in ABS or ASA with Voron settings and the

Case with custom supports. (Tree organic only from Buildplate). Very fine Part!!!

Knomi Powercable can route trouh the cutout of the G2 Front Body.

I spiral the Wifi Cable behind Knomi. Works for me but you can route it to the cutout too.

HAVE FUN

Inspired by: 

• Knomi V2 Display Mount for the Voron Stealthburner von boothyboothy 
• Anthead bei Hardk (Printer for Ants)