PHILIPS OneBlade Usb-c adapter

A small adapter that converts a OneBlade socket to USB-C, allowing you to use a standard charger instead of the original one.

The design should work with most USB-C female breakout boards. However, if you want guaranteed compatibility, I recommend the specific boards I used:
RtottiM 18 Pieces USB 3.1 Type C Male 24 Pins Male & Female SMT Type with Connector Board USB Breakout Board Male: Amazon.de: Electronics & Photo

or

https://www.aliexpress.com/item/1005008186358656.html

Print settings used:

Material: Prusament PLA

Layer height: 0.15 mm (structural)

Supports: Organic supports, build plate only