M79 Airsoft 40mm gas grenade launcher prop with KANARR CORP markings and realistic parts.

My attempt was to make this M79 model realistic as possible so you could used it for Vietnam war events or as just a nice pice to your collection.  Model has realistic manufacturer markings and imitation of the cocking mechanism under the barrel. You dont need to instal these parts if you dont want to, they are there just for the look.

Airsoft mechanism is based on King Arms variant of the M79 with some changes to make it more 3D printable. Files that are marked with KA should be compatible with the King Arms gun ( barrels ).               My version using difernt way to attach the barrel in to the receiver. 

My model offers all of the variants that were used during the Vietnam war : Full size, Half cut, Sawed off. You can combine these parts as you like and make your own M79 build. 

You are gonna need:

• M3 screws 20mm and 10mm long 
• M4 screws 30 and 10mm long - need to be cut downt to right length
• M8 long screw
• 3 mm pins 
• 2x push spring and 1x pull spring
• M4 nut for the improved version of the sight mount - On the original vesion hole for M4 screw could wearout quickly. Now you can swap the barrels without risking destroying the part.

Gun is compatible with standart airsoft 40mm shells. Dont try to shoot the real ones. Also the safety works so dont forget to used it. 

https://youtu.be/ICD29W88yD0?si=3xqb-pJ2GVk5Ju2q

You can use the KA manual to assemble your 3D printed parts.

Please share your prints with me :)