Lanard Shot Gun / Air Zone Triple Shot 6-Shot "Hexashot" Shotgun Cylinder

Replacement cylinder assembly for the Triple Shot, maintaining the shotgun function as a “Triple Shot”. It is intended to be a direct replacement for the stock cylinder, albeit adding an extra two shots, and having airtight barrels unlike the stock cylinder. Having 18 barrels in total and loading them up with half-length darts, combined with the blaster's generous plunger volume is pure divine when needing to breach in tight CQB situations. Superior to its early 2010s Nerf contemporary, Rough Cut 2x4, in every single way.

The cylinder uses an M4x25mm screw to attach the two pieces. When assembling, ensure that the cam notch lines up directly underneath the barrel just like the picture. The square nub will only allow the cam notches align in one of two ways. The rear barrel ports match the same radius distance of the stock cylinder, which should allow use of the stock plunger tube assembly.

Printing with a 0.15 height or less is recommended with the rotation cog for smoother operation. Add supports (tree is ideal) when printing the cylinder.

Edit History

• 08/08/25 Corrected screw length (M4x25mm instead of M4x20mm)