(Prusament) Zipbag Opener

Well, what if you have already printed out all the cool upgrades and tools that are available here? Yes exactly, the Prusament Bag Opener is what is still missing in your collection !!!

Of course you can also just open the plastic bag on the provided flaps but friends! We are not animals! We are MAKERS!!!

And of course works for many available zipbags  👍

You like my Work? 

Support my efforts and push the like  ❤️

Make my day and post yout Makes 🤗

Advantages:

• Cleaner straight cutting edge
• Suitable for left and right handed
• Should work not only for prusament bags 😉

Material

• 2 parts from an 9mm Cutterblate
• 2 screws M3 x 12 mm
• 2 hexagon nuts M3

Assembly Instructions

Do real MAKERS need a description !? 😉
First insert the blade on the side marked with the arrow. If almost half of the blade is in, then it has the correct position, and please be careful and do not hurt!!! Then screw the two parts together, done!

Print instructions

Simple print

No support needed

PLA and PETG gives a very good results on 0.20mm, 15 % Infill and 2 Parameters of course with original Prusament! 👍🏻

Happy Printing!!! 👋🏻