Print in Place Convertible

This is Print-in-Place design was designed to be printable on any FDM printer. Thanks to the use of bridges and 45° overhangs, this model shouldn't be too challenging. The design was heavily influenced by the 1958 Chevy Impala.

The length is roughly 140mm, but when turned 45°, it should fit even onto a 12x12cm buildplate.

Since I'm releasing this design for free, any tips are appreciated (or you can check out some of my other designs ;D)

Happy printing!

Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.