Mushroom Cap Bottle Opener

2 prints, the base and the cap. Only thing you need other than filament is a U.S. Nickel Coin.

I didn't include my g-codes because I had a couple issues that added extra time, and I need to Iron them out. Figured you guys could do better.

All in all, the print should take 3-4 hours. I used faster speeds and 0.25 layer height, and encountered no quality issues. I went with 45% infill on the cap so it would be nice and strong. Fuzzy skin modifier on the bottom of the base and be sure to add in pause prints for the coin in the cap and changing the color on the base. Feel free to switch it up however you like!

The cap will need to be printed with PETG for strength, unless you know some tricks I don't. And then I just used PLA for the base.

I'm still pretty new to the game, but I hope you like it! Constructive criticism and remixes are always appreciated!! Happy Printing! ;)

If you or someone you know needs a custom design, for any type of 3D object, send me a message!

- Hisoka