Pike | Bolt Action Foam Dart Blaster

UPDATE 22.08.2025, Added optional replacements for frame C and D, you can find them in the root folder of the downloads section.
They have a modified feeding gate so if your darts pitch downwards due to poor feeding from the nightingale mags, the new ramp shape should bring them back into orientation and prevent jams. Let me know how it works out for you and thanks for the feedback!

UPDATE 30.9.2025 Added a modified pusher to the root, this eliminates the flat face that can snag on darts and cause subsequent jams, thanks to @onus for the suggestion and feedback!

If you want to buy a premade Pike, visit Out of Darts 

Overview:

• Smooth and relatively sturdy bolt action

• uses worker nightingale mags (look at the hardware section so you get the right ones)

• lots of rail for attachments (look on my free section for some examples)

• Very good performance for a stringer due to a long powerstroke

Printing and Hardware:

• 180mm³ Printer required

• needs angled mini worker talon mags, also known as nightingale mags Example EU Example US

• 4mm elastic cord like this one

• Half darts, for example worker gen3+ (Actually highly advise these ones, other darts are longer and dont feed well off a nightingale mag)

• About 820g of filament needed (+/- a bit for deviation in slicers and print settings)

• 3 Walls 20% Gyroid Infill, print the Priming handle with 6 walls for stability

Showoff video:

Assembly Guide: