Wahoo Mount for Aerobars [parametric]

You'll need to drill the holes a little bit bigger to fit the bolts through… or adjust the hole size to be bigger. As the Wahoo bolt spacing and the GoPro bolt spacing is very slightly different.

(from original post found here: https://www.printables.com/model/878658-garmin-mount-for-aerobars-parametric)
parts for Gopro version:
- generic 'concave' Garmin to Gopro adapter
- 2x M3x20 countersunk screw

What did I do?

I took the Garmin + GoPro file, rotated holes 90 degrees, lowered spacing to 20mm, and made 61mm in the Modify panel menu.

This is not my model, I just adjusted some things. Thanks to the original maker, this is a beautiful model. I wish I could make something like this!

I'm printing with PETG 40% infil and 5 layer perimeters.

Zip tie heads are sticking out too much… might play around with having the wahoo plate sticking up a bit more, or the zip tie holes in deeper.