Flexible Mesh / Sheath Designed for Ice Screws

A flexible mesh primarily designed for ice screws to serve as a replacement cover if the ones get lost. However, can definitely be used for other applications for similar sized objects, should be able to scale up/down somewhat but nothing too crazy (unless you are evenly scaling in all dimensions. 

Designed for TPU / other flexible materials. I used 95A TPU, however it should work with others, I have just not tested it yet. 

There are 3 models, all have the same overall dimensions its just the pattern that is different. I believe ice_screw_mesh_v3_t-filled is the best one to use. 

For ice screws, I found you want the X length to be approximately (diameter of threads * 3.14) + 12mm - I found this gives a decently snug fit but no so snug its difficult to pull off. 

For assembly, you just print and then push the tabs through the holes and then you should have a nice cylindrical shape.

A copy of the drawings can be referenced here: https://github.com/UrbanPistek/projects-monorepo/blob/main/laser_cutting/snow_card/media/v3_1.2mm_drawing.png