Potensic Atom 2 Propeller Strap Remix

This remix adjusts the strap retention hook to keep the one side of the strap more permanently attached to the base.  It also adjusts the measurements of the base to allow a tighter fit on the sUAS and prevent as much shifting.  The strap has been redesigned to hold better retention on the drone, allow an easier grip for releasing the strap, and most importantly, include the Remove Before Flight language since we are all aviation geeks.

The strap is printed in Overture TPU with 4 wall and 30% infill.  I recommend a very slow speed to allow the best detail on the lettering and give better adherence if you change colors. The base was done in Overture PLA.  Supports will be needed for the strap retention hook and strap catch hook.  It's easiest printed on its side.

This remix adjusts the strap retention hook to keep the one side of the strap more permanently attached to the base.  It also adjusts the measurements of the base to allow a tighter fit on the sUAS and prevent as much shifting.  The strap has been redesigned to hold better retention on the drone, allow an easier grip for releasing the strap, and most importantly, include the Remove Before Flight language since we are all aviation geeks.