Wheelchair Cell Cradle

Wheelchair Cell Cradle

Designed for disabled veteran with limited mobility and dexterity. 

Cell phone rests in cradle, where it is wirelessly charged through a charging puck affixed to the back.  Power to the wireless puck is provided by the wheelchair's main battery.

Cradle is attached to the main frame of the wheelchair with self-taping, countersunk screws.

The design allows for the user to pull mobile phone out with limited effort.  (slot in center is intentional, such can be lifted with just one finger)

Slots on either side would allow for use of corded charger if need be.

• Material:  ABS
  (Recommend to use enclosure to prevent warping)
• Infill: 20% 
  (Infill Pattern: Adaptive Cubic)
• .2mm layer height
• Bed Temp: 110c
• Nozzle Temp: 255c