Horizontal Dock System for MadMax Toolchanger (Ender 5 / Mercury One.1 Remix)

Compatible with all toolheads supported by MadMax:
DragonBrick, OmniBurner, A4T, XOL, AntHead, Yavoth, RapidBrick, A4TBrick, and OmniBrick

Remixed for the Ender 5 / Mercury One.1, this horizontal dock system provides a clean, rigid front-facing tool change setup within the MadMax Toolchanger ecosystem. Designed to bolt directly to your front 2020 extrusion with standard M5 hardware.

🔧 Features:
• Front-facing tool loading for clean magnetic swaps
• Fits Mercury One.1 2020 front extrusion (44.5mm spacing)
• Includes both left and right dock bases and brush holders

🖨 Recommended Print Settings:
Material: ABS or PETG
Layer Height: 0.2mm
Supports: Not required
Infill: 40%
Perimeters: 3+

📦 Parts Needed:
4x M5x10 or M5x12 bolts per dock
4x M5 T-nuts per dock
4x 6×3 mm magnets for tool plate

🧪 Notes:
Tested on a DragonBrick toolhead with dual 4010 part cooling fans
Mounted on a Mercury One.1 Hydra frame with 275mm bed

Longer on the Y axis to fit my current mercury one.1 setup