Princess She-Ra

Project: She-Ra.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x164.88mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.12mm

Filaments Used:
#080a0d PLA PolyLite Black  Transmission Distance: 0.3
#bb3d43 PLA BambuLab Matte Dark Red  Transmission Distance: 1.5
#ff0000 PLA Anycubic Bright Red  Transmission Distance: 5
#7d6556 PLA BambuLab Matte Dark Brown  Transmission Distance: 2
#e5b03d PLA Geeetech Silk Gold  Transmission Distance: 5
#d3b7a7 PLA BambuLab Matte Latte Brown  Transmission Distance: 2
#e8dbb7 PLA BambuLab Matte Desert Tan  Transmission Distance: 1
#f8ef99 PLA Sunlu Meta yellow  Transmission Distance: 10
#ffff00 PLA Elegoo Matte Sunshine Yellow  Transmission Distance: 6
#00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
#ecffff PLA Kingroon White  Transmission Distance: 4.7
This print uses 11 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.56mm) swap to Dark Red
At layer #13 (0.64mm) swap to Bright Red
At layer #17 (0.8mm) swap to Dark Brown
At layer #19 (0.88mm) swap to Gold
At layer #26 (1.16mm) swap to Latte Brown
At layer #27 (1.2mm) swap to Desert Tan
At layer #30 (1.32mm) swap to yellow
At layer #32 (1.4mm) swap to Sunshine Yellow
At layer #34 (1.48mm) swap to Turquoise
At layer #36 (1.56mm) swap to White for the rest