Tool Holder for LEOTE_approach's K1/K1C/K1SE Side Panels

This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE.

I also have a Multiboard compatible version in my profile.

Printing

0.20 Layer Height

No Supports

10-15% Infill

If you printed the panel and tool holder with ABS - It should be a snug fit.

If you printed the panel and tool holder with PLA - It should be a snug fit.

If you are printing this tool holder in PLA and the panel was printed in ABS - You should compensate for ABS shrinkage by downscaling the PLA print. (I only downscaled to about 99.9%)

Thanks

Credit to the amazing work of @LEOTE_approach Link here:

CREALITY K1 | K1C | K1SE - SIDE PANELS [CLOSED + SPOOL HOLDER] by LEOTE [approach] | Download free STL model | Printables.com

Redesigned the rear part of this tool holder to fit the side panels made by LEOTE_approach