Python - Ultimate Bambu Lab AMS 2 PRO - Silica Gel Box

Notice!

This is only compatible with Python for the AMS 2 Pro. Please view my other designs for designs supporting other AMS systems, there are plenty.

About

This is a set of high capacity front mounted Silica Gel Boxes for Python - Ultimate Bambu Lab AMS 2 PRO to keep the moisture in the enclosure at a minimum. They slide into the front dovetails of Python. 

A “normal” Python setup with four spools use three Silica Gel Boxes.

Notice: It is not compatible with a stock AMS setup.

BOM - Bill of materials

Silica gel beads.

• 500 g Silica Gel Beads

About - Continued

The boxes need no assembly (only a screw in place plug to seal it) and require no supports for printing it. 

It has a woven design to minimize retraction while printing it for a quick and strong print. It has a huge capacity of around 175 g.

As it's fully 3D printed you can dry the beads without removing them from the box (make sure to print in a capable filament though!)

The funnel prints upside down, no supports needed.

A full box rooms around 175 g of silica gel beads (the scale was tared).

It comes with a screw in place funnel for easy filling.

Full weight including silica gel, the lid and the box itself is around 220 g.

The box installs in the dovetails in the front of Python, between each feeder (so 3 boxes for a full install).

Custom silica gel boxes for Python - Ultimate Bambu Lab AMS 2 PRO.