"In case of steam sale, break glass" piggy bank/gift box

A gift box or piggy bank for any gamer!

Most parts are optimized to be printed with no supports. Both Inserts should be printed face down and need no supports. The Main body should be printed with the coin slot facing down and then shouldnt need support, since the slope angle is enough to support itself. Only the front part needs supports for the alignment pins and the cutout. See also this picture

In terms of sizing, i think 100% is the minimum before the text gets really hard to read and print. I wouldnt recommend going lower, but you might be able to do it with a font change and some formatting. 140% should be a good medium size that should fit most cases. If you scale it further up or down from any of the two models, keep in mind that the slot for the acrylic glass will also be scaled and might be too tight or loose.

The stock files use acryllic glas with a thickness of 1mm.

I also added the blender file in case you want to quickly switch out the logo for another :)